Round One – Policar Monoposto

• Any Policar Monoposto F1 model is allowed
• Only the standard Slim-Can DFV 25,000rpm motor is permitted
• Only the standard transmission (Z1: 9t / Z2: 25t/16t Z3: 17t) is permitted
• Hubs must be as supplied when new
• Front tyres may be changed to a low profile and may be glazed
• Front and rear wings must be present at the start of a race
• Any rubber compound tyre that fits the standard hubs can be used
• Ballast may be added (must be inside and securely attached)
• Tyre treatments are allowed but must be dry when placed on track

FREE COMPONENTS

All screws, lead wire, eyelets, braid and spacers.

Round Two – Slot It & Policar Anglewinder (W&W 2025)

The club’s specification is an adaptation of the previous year’s 2025 Wales & West Championship IMSA rules (for those who don’t like LMP2 cars).

• All Slot It and Policar cars supplied with Flat-6 motor in an anglewinder configuration are eligible.
• Slot It and Policar GT cars originally supplied with a small can motor in the sidewinder configuration (except cars in our Slot It & Policar Classic class) are eligible when converted with an anglewinder pod and Flat-6 motor
• Magnets are not allowed
• Only standard Slot It or Policar chassis are allowed
• Only standard Slot It Flat-6 (20.500rpm) motors are allowed
• Only the standard, Slot It 1mm offset anglewinder motor mount may be fitted (suspension kits are not allowed)
• Only Slot It 11-tooth pinions are allowed
• Any Slot It anglewinder gear is allowed
• Only the standard Slot It SICH85d guide is allowed
• Only the standard Slot It SICH56b bushings are allowed
• Maximum rear axle width is 64mm
• Front and rear hubs are free choice but must be a minimum 16.9mm
• Any brand black rubber tyre is allowed
• Tyre treatments are allowed but must be dry when placed on track
• Only standard, original equipment interiors are allowed
• Ballast may be added (must be inside and securely attached)
• Rear wing must be securely attached at the start of each race

Free Components

All screws, motor wires, eyelets, braid and spacers.

W&W (2025) sanctioned cars

• Acura ARX-05
• Oreca 07

Cars supplied with Flat-6 anglewinder as standard

• Audi R8 LMP 2000
• Audi R8 LMP No.3 Le Mans 2001
• Audi R8C
• Audi 18TDi
• Lola Aston Martin DBR1-2
• Lola B09/60 LMP
• Lola B12/80
• McLaren F1 GTR
• Nissan R390 GT1

Cars supplied as sidewinder but convertible to Flat-6 anglewinder

• Audi R8 GT3 LMS EVO II
• Ferrari F4-
• Maserati MC GT3
• Maserati MC GT4
• Nissan GT-R Nismo GT3
• Any Group C