Scaleauto R-Series and Slot It Anglewinders

Name: Scaleauto R-Series and Slot It Anglewinders
Start: 2026-04-21T19:30:00+01:00
End: 2026-04-21T22:00:00+01:00

21st April @ 7:30 pm - 10:00 pm

Any Scaleauto ‘R-Series’ car is eligible (GT and rally)
Magnet must be removed
Body, chassis, motor (Tech-1), gears (11/27), hubs and guide must remain as standard
Rear wings must be present at the start
Rear-view mirrors, windscreen wipers and aerials can be removed
No lightweight interiors or body/chassis lightening allowed
Any rubber tyre that fits the standard hub can be used, branding must be visible on the sidewall of the tyre
Front tyres may be changed to a low profile type and can be glazed as required
Ballast may be added but must be inside the car and securely attached
Tyre treatments are allowed but must be dry when placed on track

All screws, lead wire, eyelets, braid and spacers.

The club’s specification is an adaptation of the previous year’s 2025 Wales & West Championship IMSA rules (for those who don’t like LMP2 cars).

All Slot It and Policar cars supplied with Flat-6 motor in an anglewinder configuration are eligible.
Slot It and Policar GT cars originally supplied with a small can motor in the sidewinder configuration (except cars in our Slot It & Policar Classic class) are eligible when converted with an anglewinder pod and Flat-6 motor
Magnets are not allowed
Only standard Slot It or Policar chassis are allowed
Only standard Slot It Flat-6 (20.500rpm) motors are allowed
Only the standard, Slot It 1mm offset anglewinder motor mount may be fitted (suspension kits are not allowed)
Only Slot It 11-tooth pinions are allowed
Any Slot It anglewinder crown gear is allowed
Only the standard Slot It SICH85d guide is allowed
Only the standard Slot It SICH56b bushings are allowed
Maximum rear axle width is 64mm
Front and rear hubs are free choice but must be a minimum 16.9mm
Any brand black rubber tyre is allowed
Tyre treatments are allowed but must be dry when placed on track
Only standard, original equipment interiors are allowed
Ballast may be added (must be inside and securely attached)
Rear wing must be securely attached at the start of each race

All screws, motor wires, eyelets, braid and spacers.