Round One – Policar Monoposto

• Only the standard Slim-Can DFV 25,000rpm motor is permitted
• Only the standard transmission (Z1: 9t / Z2: 25t/16t Z3: 17t) is permitted
• Hubs must be as supplied when new
• Front tyres may be changed to a low profile and may be glazed
• Front and rear wings must be present at the start of a race
• Any rubber tyre brand is allowed
• Ballast may be added (must be inside and securely attached)

Free Components

All screws, lead wire, eyelets, braid and spacers.

Round Two – Scalextric Inline

• Any closed-wheel Scalextric car with an inline motor configuration is permitted
• The magnet must be removed
• Motor, gears and guide must be as originally supplied new
• Where present, the bulge on the chassis underneath the gear can be removed
• Any rubber tyre that fits the hub may be used (branding should be visible on the sidewall)
• Front tyres may be low profile and glazed
• Ballast may be added but must be inside the car and securely attached
• Rear wing must be attached before any race start
• Rear view mirrors, window wipers and aerials can be removed (lost).
• No light weight interiors or body/chassis lightening is allowed
• Light sanding of the body and or chassis to give bodyrock is permitted
• Tyre treatments are allowed but must be dry when placed on track

Free Components

All screws, lead wire, braid and spacers