
Policar Monoposto plus Slot It and Policar Classics
3rd June @ 7:45 pm - 10:00 pm
Round One – Policar Monoposto
- Only the standard Slim-Can DFV 25,000rpm motor is permitted
- Only the standard transmission (Z1: 9t / Z2: 25t/16t Z3: 17t) is permitted
- Hubs must be as supplied when new
- Front tyres may be changed to a low profile and may be glazed
- Front and rear wings must be present at the start of a race
- Any rubber tyre brand is allowed
- Ballast may be added (must be inside and securely attached)
Free Components
All screws, lead wire, eyelets, braid and spacers.
Round Two – Slot It and Policar Classics
- Any Slot It or Policar classic sports car in sidewinder configuration is eligible
- Magnet must be removed
- Body and chassis must remain standard
- Rear view mirrors, windscreen wipers and aerials can be removed
- No light weight interiors or body/chassis lightening allowed
- Either the old 23k or newer 21k motors are legal
- Pinion/Gear combination must be unchanged at 11:32
- Rear hubs must be those as originally supplied
- Any rubber tyre that fits the standard hub can be used branding must be visible on sidewall of tyre
- Front tyres may be changed to low profile and can be glazed as required
- Front wheels as supplied – front axle can be adjusted with grub screws
- Standard guide can be replaced with the Slot It screw topped guide (ch85)
- Ballast may be added but must be inside the car and securely attached
Free Components
All screws, lead wire, eyelets, braid and spacers.