
Scaleauto R-Series and Sideways GT3/GTE
11th February @ 7:45 pm - 10:00 pm
Round One – Scaleauto R-Series
- Any Scaleauto ‘R-Series’ car is eligible (GT and rally)
- Magnet must be removed
- Body, chassis (black or grey only), motor (Tech-1), gears (11/27), hubs and guide must remain as standard
- Rear wings must be present at the start
- Rear-view mirrors, windscreen wipers and aerials can be removed
- No lightweight interiors or body/chassis lightening allowed
- Any rubber tyre that fits the standard hub can be used, branding must be visible on the sidewall of the tyre
- Front tyres may be changed to a low profile type and can be glazed as required
- Ballast may be added but must be inside the car and securely attached
Free Components
All screws, lead wire, eyelets, braid and spacers.
Round Two – Sideways GT3/GTE
- Any Racer Sideways GT3/GTE car is allowed
- The magnet must be removed
- Body and chassis must remain standard
- Rear wing must be attached before any race start
- Rear view mirrors, window wipers and aerials can be removed.
- No light weight interiors or body/chassis lightening is allowed
- Motor and gears must be as originally supplied new
- Wheels as originally supplied new
- Original motor pods may be replaced with Slot It alternative
- Any rubber compound tyre that fits the standard hubs can be used
- Front tyres may be changed to a low profile, can be glued, trued and glazed as required
- Tyre treatments are allowed but must be dry when placed on track
- Ballast may be added but must be inside the car and securely attached
Free Components
All screws, lead wire, eyelets