Round One – Scaleauto R-Series

• Any Scaleauto ‘R-Series’ car is eligible (GT and rally)
• Magnet must be removed
• Body, chassis (black or grey only), motor (Tech-1), gears (11/27), hubs and guide must remain as standard
• Rear wings must be present at the start
• Rear-view mirrors, windscreen wipers and aerials can be removed
• No lightweight interiors or body/chassis lightening allowed
• Any rubber tyre that fits the standard hub can be used, branding must be visible on the sidewall of the tyre
• Front tyres may be changed to a low profile type and can be glazed as required
• Ballast may be added but must be inside the car and securely attached

FREE COMPONENTS

All screws, lead wire, eyelets, braid and spacers.

Round Two – Sideways GT3

• Any Racer Sideways GT3 car is allowed
• The magnet must be removed
• Body and chassis must remain standard
• Rear wing must be attached before any race start
• Rear view mirrors, window wipers and aerials can be removed.
• No light weight interiors or body/chassis lightening is allowed
• Motor and gears must be as originally supplied new
• Wheels as originally supplied new
• Original motor pods may be replaced with Slot It alternative
• Any rubber compound tyre that fits the standard hubs can be used
• Front tyres may be changed to a low profile, can be glued, trued and glazed as required
• Tyre treatments are allowed but must be dry when placed on track
• Ballast may be added but must be inside the car and securely attached

FREE COMPONENTS

All screws, lead wire, eyelets